Page 8 - Turbo_Charger

Turbine Housing

Material: Austenitic Heat-Resistant Cast Steel

1 OR 1
ONMU… IC5400 S845 SNHU 13... MS32
• For ap ≤ 3.5 mm • For ap ≤ 6 mm
• Economical: 16 cutting edges • 8 cutting edges
• Precisely ground or utility insert • Precisely ground insert
Face Milling (Roughing)
Option 1. Standard solution Option 2. Special solution 1
• Well-secured inserts • Axially adjustable runout for 2 3
• Durable cutter body precise overhang / uniform wear
• Versatile face mill (suitable for both inserts)
Cutting conditions Cutting conditions
Vc=150 m/min (495 sfm) Vc=150 m/min (495 sfm)
fz=0.2 mm/t (0.0078 inch/t) fz=0.25 mm/t (0.0098 inch/t)

2
IQ845 SYHU… IC5400
• 8 cutting edges
• Smooth and stable cut
• Low power consumption
• Strong and durable design
• Excellent surface finish
4
Face Milling (Finishing)
• High-positive pocket inclination Cutting conditions
• Extremely rigid clamping due to dovetail pocket Vc=115 m/min (378 sfm)
• Axial adjustment for fine surface finish fz=0.18 mm/t (0.0070 inch/t)
• Fine pitch for increased metal removal rate

3
TAG N..MF IC5400
• Durable tangential insert design
• Unique chipformer provides chip control
Slot Milling • Reinforced cutting edge for longer tool life
• Tangential clamping for Cutting conditions
maximum stability Vc=70 m/min (230 sfm)
• Safe clamping (no insert pulling fz=0.07 mm/t (0.0027 inch/t)
out during machining)
• Self clamping mechanism
(without screw)
• Designed for high speed machining * For SiMo, Ductile Cast ircon and other materials,
insert grades to be selected accordingly
8 * All the tools are available for dry machining, MQL and coolant