JYRSINTÄ
NPA 12/2017
IC882 ja IC5820
Uudet tehokkaat laadut titaanien, ruostumattomien terästen ja korkeaseosteisten materiaalien jyrsintään.
Today, as more and more titanium parts are necessary for the construction of modern airplanes, the aerospace industry is in constant demand to increase cutting tool performance for machining titanium. To comply with this high market demand,
ISCAR esittelee uudet IC882 ja IC5820 kovametalli laadut.
that feature a more productive means of machining titanium alloys. These include the common Ti6Al4V and tougher, harder to cut titanium alloys such as Ti-5Al-5V- 5Mo-3Cr (Ti 5-5-5-3), Titanium Ti-10V-2Fe-3Al (Ti 10-2-3) and other super alloys.
IC882
Grade IC882 features a very tough and strong substrate. The fracture toughness (K1c) that
measures the resistance of material to the propagation of a crack in the substrate is at least 20%
higher when compared to the competitor’s carbide grades, the ones that are equivalent to ISCAR’s
carbide grades IC328, IC330, and IC830.The IC882 with its tough carbide substrate,
uusi kova PVD pinnoite ja SUMO TEC®
jälkikäsittely, parantavat iskunkestävyyttä, kuumalujuutta, hapettumisen kestoa sekä vähentävät kuoppakulumista ja irtosärmän kertymistä jolloin työkalun kesto paranee, ja kuluminen ja lohkeilu vähenee ja voidaan käyttää suurempia nopeuksia ja laskea tuotantokustannuksia per kappale.
Rake & edge wear images
20 minuutin jälkeen aineessa Ti6Al4V
rouhinta arvoilla.
The new IC882 grade is intended mainly for machining titanium alloys and heat resistant steels.
In addition, it can be used successfully for milling stainless steel and high-temperature super
alloys (HTSA) at medium to high cutting speeds, even under unfavorable machining conditions or
interrupted cuts. The ISO application range of grade IC882 is
M25-M45
/
S20-S30
.
Applications
-
Milling titanium alloys at moderately stable and unstable conditions
-
Milling stainless steel at moderate to high cutting speeds
-
Interrupted cutting applications
Milling AISI 420 - Tool Life Comparison
IC5820
Grade IC5820 has a very tough, strong carbide substrate combined with
CVD new hard coating
and SUMO TEC® post coating treatment. It features a substantially improved impact strength, higher hot hardness, oxidation, notch wear and built-up edge formation resistance. These contribute to longer tool life, reliable wear and chipping resistance. The IC5820 grade enables the increase of cutting speeds that result in higher metal removal rates and reduced production cost per part. Mainly used for milling titanium alloys.
ISO normin mukainen alue IC5820 laadulle on
M20-M35
/
S15-S25
.
Sovellus
-
Sama kuin laadulla IC882
-
20% - 30% korkeammat leikkuuarvot muihin tunnettuihin kovametallilaatuihin verrattuna
-
Vaatii suuren nestemäärän ja kohdistetun jäähdytysnesteen; toimii parhaiten korkeapainejäähdytyksen kanssa.
Milling Grades Relative Application Areas
Most field tests were very successful with advantageous results when compared to ISCAR grades vs. competitors’ grades.
Materiaali: TiAl6V4
Materiaali: AISI 304
Materiaali: AISI 420 (1.4021)
Turbiinin siipi
Materiaail: S.S. Cr-Mo-W-V (HRC31-36)
Materiaali: Titanium 10.2.3
Materiaali: Titanium Ti-5AL-2.5Sn
Sovellus:
Nurkkajyrsintä korkea olake – Siilijyrsimellä
Kappale:
Suihkumoottorin kiinnike
Materiaali:
Titanium 6Al4V valu
Työstökone:
Makino T1
Jäähdytys:
Paine 70 bar 100 litraa/min
Kilpailija
Työkalun kestoikä - 60 min
Iscar
SDHX 120508-PD-N IC5820
Otsapalat
Kuluminen 300 min jälkeen
Ohessa lista teräpaloista joissa käytetään IC882 ja IC5820 laatuja sekä leikkuunopeussuositukset molemmille terälaaduille.
Suositeltavat leikkuunopeudet jyrsimen vaihtoterille joissa käytetään laatuja IC882 ja IC5820
Uudet terälaadut ovat jo mahdollistaneet Iscarin osuuden kasvattamisen lentokoneteollisuudessa.
IC882
3309408 BLR D160-QT IC882
3309409 BLR D200-QT IC882
3309410 BLR D250-QT IC882
3309411 BLR D300-QT IC882
3309412 BLR D320-QT IC882
3309418 FF WOCT 09T320T IC882
3309416 FFQ4 SOMT 120516HP IC882
3309413 H600 WXCU 05T312HP IC882
3309414 H600 WXCU 070515HP IC882
3309415 H600 WXCU 080612HP IC882
3309419 P290 ACKT 1204PDR-FW 882
5668576 P290 ACKT 1806PDR-FW 882
3309420 RCCT 1206MO IC882
3309421 RCCT 1206MO-T IC882
5668376 SDHT 100408-PDEN IC882
3309425 SDHX 120508-PD-N IC882
IC5820
3309561 FFQ4 SOMT 120516HP IC5820
3309562 H600 WXCU 05T312HP IC5820
3309563 H600 WXCU 070515HP IC5820
3305260 SDHT 100408-PDEN IC5820
3315344 SDHT 120508-PDEN IC5820
3309559 SDHW 100408-TN IC5820
3320555 SDHW 100408-TN-CS IC5820
3305229 SDHX 120508-PD-N 5820
Saatavuus
Varastossa.
Hinnat
Hinnat tuotteille on päivitetty järjestelmään.